Call Us Now 613-612-8733

berintek

Same-Day Guarantee

How to fix a garage door that won’t close

Home - Uncategorized - How to fix a garage door that won’t close

When Bob’s Garage Door Decided to Rebel

Let me tell you a story about my neighbor, Bob. He’s a good man, lover of all things DIY, and proud car owner. One afternoon, while I was tending to my roses, I saw him struggling with his garage door. It simply refused to close all the way. He’d hit the remote, and the door would begin its descent, only to stop midway, leaving a gap big enough for a raccoon to waltz through. I could see the frustration mounting on his face.

Identifying the Problem

Just like Bob, many homeowners face similar issues with their garages. When your garage door refuses to close, it’s not just a security risk, but also a test of patience. Let’s look at a few possible scenarios:

Garage Door Won’t Close With the Remote

First up, the classic case when your garage door ignores the remote’s commands. You press the button and… nothing. It’s as if the door has suddenly developed a mind of its own.

Garage Door Won’t Close All the Way

Then there’s the situation Bob was facing. The garage door begins to close, but stops mid-track. It’s like a stubborn child, refusing to go all the way.

Garage Door Reverses Before Hitting the Floor

And finally, there’s the case when the garage door starts closing, but just before it hits the floor, it reverses its direction. It’s like a boomerang, coming back up when it should be settling down.

General Garage Door Troubleshooting Techniques

Before calling in the cavalry (or the garage door repair guys), here are a few things you can do to troubleshoot the situation yourself. Bob, being the DIY enthusiast that he is, tried them all.

Examining the Garage Door Sensors

Garage door sensors are like the eyes of your garage door. They need to be aligned properly to see correctly. If they’re misaligned or blocked, your garage door won’t close. So, give these little fellas a good look.

Inspecting the Garage Door Track and Rollers

Next, check the garage door track and rollers. These are the parts that guide your door up and down. If they’re clogged with debris or are not smooth, the door may not close properly. Time to bring out your inspection glasses!

Checking for Obstruction

Finally, look for any obvious obstructions. Sometimes, a stray box or a forgotten tool can be the villain of the story, preventing the door from closing. Clearing the area might just be the solution.

After a bit of fiddling, Bob was able to fix his rogue garage door. Turns out, a misaligned sensor was the culprit. And once he fixed it, the door worked like a charm. A little bit of garage door installation knowledge, combined with some old-fashioned DIY spirit, can indeed save the day.

Specific Solutions to Common Garage Door Closing Issues

There are a few common issues that can prevent your garage door from closing properly. These include misaligned sensors, a bent track, or problems with the opener’s limit switches. Let’s look at how to address each of these problems.

How to Realign Garage Door Sensors

Garage door sensors play a vital role in the safety and functionality of your door. If your garage door isn’t closing, the sensors may be misaligned. Here’s how to realign them:

  • Locate the two sensors at the bottom of your garage door. One should have a green light and the other a red light.
  • If either light is blinking or off, this indicates they’re out of alignment.
  • Adjust the sensors until both lights are solid and facing each other.

Remember: If the problem persists, seek professional help. It may save you time and ensure your garage door is repaired safely and correctly.

Fixing a Bent Garage Door Track

A bent track can cause your garage door to operate unevenly or not at all. Here’s how to fix it:

  • Loosen the screws holding the track to the wall.
  • Adjust the track so it’s straight and level.
  • Tighten the screws to secure the track in place.

Always remember: If you’re still facing issues, it’s best to call a professional for assistance.

Adjusting the Garage Door Opener’s Limit Switches

The limit switches control where your garage door stops when it opens and closes. If your door isn’t closing all the way, you may need to adjust these switches. Here’s how:

  • Locate the limit switch dial on your garage door opener.
  • Turn the dial in small increments until the door closes fully.
  • Test the door to ensure it’s operating correctly.

Note: If the issue persists, it’s advisable to contact a professional. This will save you time and ensure your garage door is functioning properly.

Precautions and When to Call a Professional

While DIY solutions can be effective, it’s important to take precautions to ensure your safety. Additionally, there are times when it’s best to call a professional.

Safety Tips When Performing DIY Garage Door Repairs

Here are some safety tips to follow when performing DIY garage door repairs:

  • Always disconnect the power before starting any repairs.
  • Use the right tools for the job.
  • Never attempt to adjust the high-tension springs yourself.
  • Always consult the owner’s manual before starting any repairs.

Lastly, if the problem continues, don’t hesitate to call a professional.

Signs You Might Need to Call a Professional for Garage Door Repair

While there are many issues you can fix yourself, some problems require a professional’s expertise. Here are some signs that it’s time to call a professional:

  • Your garage door doesn’t open or close at all.
  • The door makes a lot of noise when operating.
  • You’ve tried DIY solutions and the problem persists.
  • The door is uneven or off-track.

Remember: When in doubt, it’s always best to call a professional. They have the expertise to quickly and safely repair your garage door.